- 12 -
Operation
Antenna mode
Tune in mode for TV or Cable TV.
It is necessary to select the antenna input appropriate for the input mode corresponding
to the type of the local broadcast signal.
Note:
This function is disabled when the function “
GAME GUARD
” is active.
• The TV mode is used when the TV set is not connected to a cable network. For example,
when a VHF/UHF (channels 02 to 69) antenna is being used instead.
• The Cable mode is used when the TV set is connected directly to a cable network, and a
decoder box - supplied by the cable company - is not being used (channels 01 to 125).
1. Press the
ACTION
button to display the
main menu.
2. Use the
CHANNEL
buttons (
$
or
4
) or
VOLUME
buttons (
“
or
”
) to select the
symbol “
SET-UP
”.
3. Press again the
ACTION
button to
display the adjustment menu.
4. Press the button
CHANNEL
(
$
) to select
the option “
PRESS CH
$
FOR MORE
”, and
a second page with options will display.
5. Use the
VOLUME
buttons (
“
or
”
) to
select “
TV
” or “
CABLE
”.
Operation
Automatic channel tuning
Through this function, it is possible to tune in all channels that are locally broadcast. These
channels are the
programmed channels
and are selected through the
CHANNEL
buttons
(
$
or
4
) or through the numerical keypad on the remote control.
Note:
This function is automatically disabled when the function “
GAME GUARD
” is active.
1. Press the
ACTION
button to display the
main menu.
2. Use the
CHANNEL
buttons (
$
or
4
) or
VOLUME
buttons (
“
or
”
) to select the
symbol “
SET-UP
”.
3. Press again the
ACTION
button to
display the adjustment menu.
4.
Press the button
CHANNEL
(
$
) to select
the option “
PRESS CH
$
FOR MORE
”, and
a second page with options will display.
5. Press the button
CHANNEL
(
$
) to select
the option “
AUTOMATIC TUNING
”.
6. Use the
VOLUME
buttons (
“
or
”
) to
begin the automatic channel tuning
procedure. The channels will display in
increasing numerical order, until all
broadcast signals for the selected
antenna mode are scanned.
7. After the scanning is finished, press the
ACTION
button twice to exit the
configuration menu.
Obs.:
The numbers of the channels that are
properly tuned in will display in blue.
The other channels will be hidden,
but are accessible directly through
the numerical keypad on the remote
control unit.
TC-20G12P / TC-29G12P / TC-29G12PU
Operation Guide
Summary of Contents for TC-29G12P
