background image

23) 

WARNING:

SMALL PARTS CAN PRESENT CHOKING 
HAZARD IF ACCIDENTALLY SWALLOWED. 
KEEP SMALL PARTS AWAY FROM YOUNG 
CHILDREN.
DISCARD UNNEEDED SMALL PARTS AND 
OTHER OBJECTS, INCLUDING PACKAGING 
MATERIALS AND PLASTIC BAGS/SHEETS 
TO PREVENT THEM FROM BEING PLAYED 
WITH BY YOUNG CHILDREN, CREATING THE 
POTENTIAL RISK OF SUFFOCATION.

24) 

WARNING:

To prevent the spread of fire, 
keep candles or other open 
flames away from this product 
at all times.

25) 

WARNING:

Do not place this TV in any medical institutions 
or locations with medical devices.

Radio waves from this TV may interfere with the 
medical devices and cause accidents due to the 
malfunction.

26) 

WARNING:

Do not use this TV near any automatic control 
devices such as automatic doors or fire alarms.

Radio waves from this TV may interfere with the 
automatic control devices and cause accidents due 
to the malfunction.

27) 

WARNING:

Keep this TV away at least 15 cm from the 
location where a cardiac pacemaker is 
implanted.

Radio waves from this TV may interfere with the 
operation of the pacemaker.

28) 

CAUTION:

The Power switch on this unit will not completely 
shut off all power from AC outlet. Since the power 
cord serves as the main disconnect device for the 
unit, you will need to unplug it from the AC outlet to 
shut down all power.
Therefore, make sure the unit has been installed 
so that the power cord can be easily unplugged 
from AC outlet in case of an accident. To avoid fire 
hazard, the power cord should also be unplugged 
from the AC outlet when left unused for a long 
period of time (for example, when on vacation).

29) 

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE 
THIS PLUG WITH A RECEPTACLE OR OTHER 
OUTLET UNLESS THE BLADES CAN BE FULLY 
INSERTED TO PREVENT BLADE EXPOSURE.

30) 

CAUTION:

USE WITH OTHER STAND MAY RESULT IN 
INSTABILITY POSSIBLY CAUSING INJURY.

31) 

CAUTION:

DANGER OF EXPLOSION IF BATTERY IS 
INCORRECTLY REPLACED. REPLACE ONLY 
WITH THE SAME OR EQUIVALENT TYPE.

ANTENNA 
LEAD-IN WIRE

ANTENNA 
DISCHARGE UNIT 
(NEC SECTION 
810-20)
GROUNDING 
CONDUCTORS (NEC 
SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE 
SYSTEM (NEC ART 250, PART H)

ELECTRIC 
SERVICE 
EQUIPMENT

GROUND CLAMP

EXAMPLE OF ANTENNA GROUNDING AS PER (NEC) 
NATIONAL ELECTRICAL CODE

19)  An outside antenna system should not be located 

in the vicinity of overhead power lines, other electric 
light, power circuits, or where it can fall into such 
power lines or circuits. When installing an outside 
antenna system, extreme care should be taken to 
keep from touching such power lines or circuits as 
contact with them might be fatal.

20)  Unplug this TV from the wall outlet and refer 

servicing to qualified service personnel under the 
following conditions:
a. When the power cord or plug is damaged or 

frayed.

b. If liquid has been spilled into the TV.

c. If the TV has been exposed to rain or water.

d. If the TV does not operate normally by following 

the operating instructions.

Adjust only those controls that are covered 
by the operating instructions as improper 
adjustment of other controls may result in 
damage and will often require extensive work 
by a qualified technician to restore the TV to 
normal operation.

e. If the TV has been dropped or the cabinet has 

been damaged.

f. When the TV exhibits a distinct change in 

performance - this indicates a need for service.

21)  When replacement parts are required, be sure 

the service technician uses replacement parts 
specified by the manufacturer that have the same 
characteristics as the original parts. Unauthorized 
substitutions may result in fire, electric shock, or 
other hazards.

22) 

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, DO NOT EXPOSE THIS APPARATUS 
TO RAIN, MOISTURE, DRIPPING OR 
SPLASHING.
DO NOT PLACE LIQUID CONTAINERS 
(FLOWER VASES, CUPS, COSMETICS, ETC.) 
ABOVE THE SET (INCLUDING ON SHELVES 
ABOVE, ETC.).

5

English

Summary of Contents for TC-40DX650C
























Reviews: