background image

6

 

 

 

 

 

CEA CHILD SAFETY NOTICES:  Flat panel displays are not always supported on the proper stands or
installed according to the manufacturer’s recommendations.  Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause
personal injury or even death.

The consumer electronics industry (of which Panasonic is a member) is committed to making home
entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety
guidelines:

TUNE INTO SAFETY:

One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use
of your flat panel display.

Carefully read and understand all enclosed instructions for proper use of this product.

Don’t allow children to climb on or play with furniture and television sets.

Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

Remember that children can become excited while watching a program, especially on “larger than life”
flat panel displays.  Care should be taken to install the display where it cannot be pushed, pulled over,
or knocked down.

Care should be taken to route all cords and cables connected to the flat panel display so that they
cannot be pulled or grabbed by curious children.

WALL MOUNTING:

IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).

Follow all instructions supplied by the display and wall mount manufacturers.

If you have any doubts about your ability to safely install your flat panel display, contact your retailer
about professional installation.

Make sure the wall where you are mounting the display is appropriate.  Some wall mounts are not
designed to be mounted to walls with steel studs or old cinder block construction.  If you are unsure,
contact a professional installer.

A minimum of two people are required for installation.  Flat panel displays can be heavy.

Panasonic recommends that a qualified installer perform the wall-mount
installation.  See page 5.

Safety Precautions 

(Continued)

  Transport only in upright position

  Transporting the unit with its display panel facing upright or 

downward may cause damage to the internal circuitry.

  Using a dry cloth, clean any dust from the power supply 

cord and plug regularly.

  Build-up of dust on the power cord plug can increase 

humidity, which might damage the insulation and cause a fire.

This Plasma TV radiates infrared rays; 

  therefore, it may affect other infrared communication 

equipment. Install your infrared sensor in a place away from 

direct or reflected light from your Plasma TV.

The TV will still consume some power as long as the power 

supply cord is connected to the wall outlet.

  Display panel is made of glass. Do not apply strong force 

or impact to the display panel.

  This may cause damage resulting in injury.

  The TV is heavy. TV should be handled by 2 or more 

people. Support as shown to avoid injury by the TV 

tipping or falling.

 

Summary of Contents for TC-50PS14 - 49.9" Plasma TV



























































Reviews: