background image

Operating Instructions 

11 

 
 

1 Monitor Images on a PC 

 

P

 Alarm occurrence indication button

*2 

This button will be displayed and will blink when an alarm has occurred. When this button is clicked, this button 
will disappear. (section 3) 

 
Q

 Full screen button

  

Images will be displayed on a full screen. To return to the 

“Live” page, press the [Esc] key. The aspect ratio of 

displayed images will be adjusted in accordance with the monitor. 

 
R

 Snap shot button

  

Click this button to take a picture (a still picture). The picture will be displayed on a newly opened window. When 
right-clicking on the displayed image, the pop-up menu will be displayed. It is possible to save the image on the 
PC by selecting “Save” from the displayed pop-up menu. 
When “Print” is selected, printer output is enabled. 

 
Note

 

 

For the case of using Windows 7 or Windows Vista, the following settings may be required. 
Open Internet Explorer, click [Tools] 

 

[Internet Options] 

 

[Security] 

 

[Trusted Sites] 

[Sites]. 

Register the unit address on [Website] of the displayed trusted widows. 

 
S

 Main area

  

Images from the camera will be displayed in this area. 
The current time and date will be displayed according to the settings configured for 

“Time display format” 

and “Date/time display format”. (section 7.1) 
When clicking a desired point while displaying live images in the main area, the camera will move to locate the 
clicked point at the center of the main area. 

 
Note

 

 

When operated by a lower access level user, images displayed on the screen may be changed temporarily. 
This does not affect operation of the unit. 

 

Depending on the PC in use, screen tearing* may occur when the shooting scene drastically changes due 
to the GDI restrictions of the OS. 

 
*A phenomenon in which portions of the screen are displayed out of alignment. 

 

 

*1 

Only operable by users whose access level is “1. Administrator”. 

*2 

Only operable by users whose access level is “1. Administrator” or “2. Camera control” when “On” is selected for “User auth.” (section 11) 

 

1.3 

Monitor images from multiple cameras  

Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras) 
can be displayed simultaneously. In order to use multi-screen, IP addresses of network cameras and units used 
to connect to cameras must be configured to the unit. 4 cameras can be registered as a group and up to 4 
groups (16 cameras) can be registered. (section 9) 
 

IMPORTANT

 

 

When displaying images on a 16-screen, panning, tilting and zooming operations become unavailable for 
images from cameras with Pan/Tilt/Zoom functions. 

 

When the power is turned off or the LAN cable is disconnected while displaying images, displaying images 
on a multi-

screen from the “Live” page will become unavailable. 

 

Note

 

 

When displaying images on a 4-screen, panning, tilting and zooming operations become available only for 
images from cameras with Pan/Tilt/Zoom functions. Refer to our website 
(http://panasonic.net/pss/security/support/info.html) for further information about the compatible cameras 
and their versions. 

 

Only JPEG images can be displayed on a multi-screen. 

Summary of Contents for TC0938450-015CE

















































































































Reviews: