Operating Instructions
15
2 Monitor images on a cellular phone/mobile terminal
Note
It is necessary to configure the network settings of the mobile terminal in advance to connect to the
Internet and monitor images from the unit. (section 13)
1.
Access to “http://IP address/cam”
*1
or “http://Host name registered in the DDNS server/cam”
*2
using a
mobile terminal.
Images from the unit will be displayed.
A
Live images area
Displays images from the camera.
B
Resolution control
The resolution can be changed by selecting a resolution setting from the buttons.
Picture (Camera) mode VGA [4:3]
320x240/640x480 (default)
Picture (Camera) mode VGA [16:9]
Not supported by the Thermal Camera
Note
You can change the image size displayed on the mobile terminal by accessing the following addresses.
Large display: http://IP address/cam/dl
Medium display: http://IP address/cam/dm
Small display: http://IP address/cam/ds
The pan/tilt/zoom/focus functions of cameras connected to the unit cannot be operated from mobile
terminals.
When the resolution is changed by the resolution control, the displayed resolution changes but the
image size remains the same.
When the HTTP port number is changed from “80”, enter “http://IP address: (colon) + port number/ cam”
*1
in the address box of the browser. When using the DDNS function, access to
“http://Host name registered
in the DDNS server: (colon) + port number/cam”
*2
.
When
“HTTPS” is set in “HTTPS” - “Connection” on the [Network] tab of the “Network” page, enter the
following:
“https://IP address: (colon) + port number/cam” or “https://Host name registered in the DDNS server:
(colon) + port number/cam”.
When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the mobile terminal in use, password entry may be required each time the
screen is switched.
