Operating Instructions
91
14 Configure the settings relating to the schedules [Schedule]
1.
Select an action to be assigned to the schedule from “Schedule mode”. “Off” is selected at the default.
Off:
No action will be taken for the respective schedule.
VMD permission:
The video motion detection (VMD) function will be active during the period of the
schedule.
Access permission:
Users whose access level is set to 2 and 3 on the “User auth.” tab (section 11)
can access the unit only in the period of schedule.
Note
Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page (section 11) and “Off” for “Host
auth.” on the “Host auth.” page (section 11.2) to validate “Access permission”.
2.
Select days of a week by checking the respective checkboxes.
3.
From the pull-down menu, select the start time and the end time of the schedule.
When not designating time, check the checkbox of “24h”.
4.
Click the [Set] button after completing the settings.
The result will be displayed at the bottom of the window.
Note
The schedules displayed at the bottom of the window can be identified by colors assigned to each
schedule.
