26
Press to select the code.
• The code starts from the current device.
• Press
POWER
button to test the operation.
• Repeat the steps until the component code is
found. It may take many attempts before the
correct code is found.
Press to store the code.
Operating peripheral equipment using the remote control
1
2
3
Enter the 3-digit infrared code
(see pages 27, 28).
• Factory default setting :
Panasonic
• Press
POWER
to test the
operation.
Press and hold
POWER
and
OK
together,
for at least 5
seconds
.
• The mode selection buttons
flashes, and then release the
POWER
and
OK
.
POWER
+
1
2
3
4
5
6
7
8
0
9
CH
CH
VOL
VOL
O K
VCR
DVD
DBS/CBL
TV
Select the type of the component.
• The selected button light and all
others go out.
Programming the remote control code
You can operate other manufacturers’ components using this TV’s remote control.
Preparations:
• Connect the plug of the external component to the wall outlet.
• Make sure the component is turned off.
Notes:
• If the component does not operate with the remote control, repeat
the procedure using another code. (Some brands have multiple
codes).
• If an incorrect code is entered, or if the procedure takes longer
than 30 seconds, the programming will fail.
To find the code not listed in the index
RETURN
EXIT
MENU
PLAY
R-TUNE
SLEEP
PROG
GUIDE
RECALL
MUTE
TV/VIDEO
STOP
T V
PAUSE
REC
FF
REW
ASPECT
TV/VCR
VCR/DBS CH
SAP
CH
O K
CH
VOL
VOL
POWER
VCR
DVD
DBS/CBL
TV
1
2
3
4
5
6
7
8
0
9
After step 2 above,
