background image

Other

33

Status of the charging cradle LED

Charging cradle LED

Discription

The charging cradle LED (cyan) 
does not flash even after putting 
the earphones into the charging 
cradle.

There is no charge remaining in the charging cradle battery.

• First charge the charging cradle.

You are trying to charge and the 
charging cradle LED goes out 
soon after starting.

The charging cradle is fully charged.

• If the charging cradle LED (cyan) does not blink with the earphones in the 

charging cradle when the lid of the charging cradle is opened, then the 
earphones are fully charged.

Does not light or blink even 
when you open the charging 
cradle lid.

There is no charge in the battery.

• Use the USB charging cord (supplied) to charge. (

l

15)

• Take the earphones out of the charging cradle, and after unplugging the 

USB charging cord, close the lid and leave it for 3 minutes. Then open the 
lid of the charging cradle and confirm that the power turns on.

Red blinks rapidly.

The unit is not charged correctly.

• Unplug the USB charging cord and plug it in again. If it still blinks red again, 

refer servicing to qualified service personnel.

Cyan blinks rapidly.

The earphones are not inserted correctly.

• Please reinsert the earphones correctly.
• There is dust or droplets of water on the terminals of the earphones and 

charging cradle. Remove dust and water droplets.

eah̲az60̲az40̲pnqp1654ya̲full̲eng̲s.book  33 ページ  2021年12月21日 火曜日 午後5時18分

Summary of Contents for Technics EAH-AZ40











































Reviews: