26
Item
Effect Details
Black
extension
Less
More
Adjusts the dark shades of the image in gradation.
Input level
Less
More
Adjustment of parts which are extremely bright and hard to see.
Gamma
Down
Up
S Curve
2.0
2.2
2.6
“W/B”
adjustment
Less
More
W/B High R/G/B:
Adjusts the white balance for light red, light green or light blue
areas.
W/B Low R/G/B:
Adjusts the white balance for dark red, dark green or dark blue
areas.
Carry out “W/B” adjustment as follows.
1.
Adjust the white balance of the bright sections using the “W/B High R”, “W/B
High G” and “W/B High B” settings.
2.
Adjust the white balance of the dark sections using the “W/B Low R”, “W/B
Low G” and “W/B Low B” settings.
3.
Repeat steps
1
and
2
to adjust.
Steps
1
and
2
affect each other’s settings, so repeat each step in turn to
make the adjustment.
Cinema
reality
Off
On
When “on”, the display attempts to reproduce a more natural interpretation of
sources such as movie pictures, which are recorded at 24 frames per second. If
the picture is not stable, turn the setting to “off”.
Note:
When On, this setting only affects the following signal input:
525i (480i), 625i (575i), 1125 (1080) / 60i
Studio
Gain
Off
On
Sharpens the contrast for a better view when a part of the image is too light to
see.
Off:
Disables “Studio Gain”.
On:
Enables “Studio Gain”.
Notes:
• “Studio Gain” can be modi ed when “Studio mode” in the Options menu is
“On”. When “Studio mode” is “Off”, this setting is “Off” and cannot be changed.
(see page 43)
• This setting is valid only when the input signals are as follows:
RGB (analog), SDI, HDMI
Picture Adjustments
Notes:
• You can change the level of each function
(Contrast, Brightness, Colour, Hue, Sharpness)
for each Picture Mode.
• The setting details for Normal, Dynamic,
Cinema and Monitor respectively are memorized
separately for each input terminal.
• In Contrast, there is not a noticeable change
even when contrast is increased with a bright
picture or reduced with a dark picture.
Advanced settings
Item
Effect Adjustments
Contrast
Less
More
Selects the proper brightness
and density for the room.
Brightness
Darker
Brighter
Adjusts for easier viewing of
dark pictures such as night
scenes and black hair.
Colour
Less
More
Adjusts colour saturation.
Hue
Reddish
Greenish
Adjusts for nice skin colour.
Sharpness
Less
More
Adjusts picture sharpness.
Notes:
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
