background image

2/2

Setup

Screensaver

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Screensaver

Start

Function
Mode

Side panel
Wobbling
Peak limit

Finish Time

Start Time

White bar scroll

Off

6:15

12:30

High

Off
Off

PRESENT  TIME    99:99

Screensaver

Start

Function
Mode

Side panel
Wobbling
Peak limit

Finish Time

Start Time

White bar scroll

Off

6:15

12:30

High

Off
Off

PRESENT  TIME    99:99

Screensaver

Start

Function
Mode

Side panel
Wobbling
Peak limit

Finish Time

Start Time

White bar scroll

On

6:15

12:30

High

Off
Off

PRESENT  TIME    99:99

29

Screensaver 

(For preventing image retention)

Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.

Reversal / Scroll selection

2

3

1

4

Press to display the Setup menu.

Press to select Screensaver.

Press to display Screensaver screen.

Press to select Function.

Press to select the desired function.

White bar scroll 

 Image Reversal 

White bar scroll : The white bar will scroll from left to right.

Image Reversal : Negative image will be displayed on the screen.

Mode selection

Start setting

5

When the Mode is set to On, press to select 
Start.

Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated. 

To stop the 

Screensaver under On, press the R button. 

Press to select Mode.

Press to select each mode items.

Off

Interval 

: Operates when Periodic Time and Operating Time are setup 

and those times arrive.

Time Designation : Operates when Start Time and Finish Time are setup and 

those times arrive.

On 

: Operates when Start is selected and the ACTION (  ) button 

is pressed.

Summary of Contents for TH-42PS10BK

























































Reviews: