background image

WAVEFORM MONITOR

The waveform monitor displays (see page 47). 
To exit this mode, press the FUNCTION button.

MARKER SETTINGS

The marker displays (see page 48). 
Each time the FUNCTION button is pressed, the screen is switched in the following order; 
PRESET1  PRESET2  OFF.

HV DELAY

The video blanking period displays (see page 28). 
Each time the FUNCTION button is pressed, the screen is switched in the following order; 
H DELAY  V DELAY  HV DELAY  OFF.

BLUE ONLY

The screen displays only blue color for image adjustment.
To exit this mode, press FUNCTION button.

MONO

The screen is displayed in black and white by the Y signal alone (see page 50). 
To cancel, press the FUNCTION button.

R ON/OFF / G ON/OFF / B ON/OFF

R / G / B signals are turned off (see page 50). 
Each time the FUNCTION button is pressed, each signal switches between On/Off.

DIGITAL ZOOM

The digital zoom function starts up (see page 22). 
To exit this mode, press the FUNCTION button.

OFF TIMER

The Plasma Display can be preset to switch to stand-by after a  xed period.
The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the 
FUNCTION button is pressed.

30 MIN

60 MIN

0 MIN(Cancel)

90 MIN

When three minutes remain, “OFF TIMER 3 MIN” will  ash.
The off timer is cancelled if a power interruption occurs.

EXTERNAL SCALER MODE

The scaler function is set (see page 41). 
Each time the FUNCTION button is pressed, it switches between ON/OFF.

/ VOLUME -

The volume is adjusted.
Press the FUNCTION button to turn the volume UP/DOWN.

MUTE

The sound is temporarily muted.
Press the FUNCTION button again to cancel.

64

Using FUNCTION button

Summary of Contents for TH-50BT300U













































































Reviews: