8
9
Quick Start Guide
Accessories/Options
D
D
Preventing the plasma television from falling over
Accessories/Options
For 42'' Plasma television
Accessories for pedestal security
1
Band (1)
2
Screw (3)
3
Wood screw (1)
4
Clamp (2)
Nominal diameter
4 mm x 10
Ŷ
Securing to a base
Ŷ
Securing to a wall
screw
2
Band
1
Wood screw
3
Fasten with wood screws in the holes
in the back edge of the wood worktop.
If there are no holes, first drill them in
the middle of the thickness of the wood
worktop, and then fasten the strap with
wood screws.
Wall
Clamp
4
screw
2
* Use strong wire or chain which is commercially
available to secure the plasma television to a
solid area of the wall or a pillar.
* The plasma TV must be fastened to both the base and the wall.
Fasten with wood screws in the holes in the back
edge of the wood worktop. If there are no holes,
first drill them in the middle of the thickness of the
wood worktop, and then fasten the strap with wood
screws.
Screws on main body
* Remove the screws at both
top corners on the rear side of
the plasma TV, and attach the
clamps 4 to the plasma TV
using the removed screws.
* Use strong wire or chain which
is commercially available to
secure the plasma television
to a solid area of the wall or a
pillar.
Wood
Worktop
Front
Accessories for pedestal security
Ŷ
Securing to a base
Ŷ
Securing to a wall
For 50'' Plasma television
D
Band
Screw
Wood Screw
Clamp
Clamp
Accessories for pedestal security
Nominal diameter
4 mm x 12
Fasten with wood screws in the holes
in the back edge of the wood worktop.
If there are no holes, first drill them in
the middle of the thickness of the wood
worktop, and then fasten the strap with
wood screws.
* Use a flat-head screwdriver to remove
the caps at the left and right top on the
rear side of the plasma TV, and attach
the hooks 4 to the plasma TV using
the hook securing screws
5
. (Keep
the caps you have removed in a safe
place.)
Hook securing
screw
5
• Securing method
Ŷ
Securing to a base
Ŷ
Securing to a wall
For 58'' Plasma television
M8 x 35
Screw
Band
Wood
screw
Hook
Hook
* Use a strong wire or chain which is
commercially available to secure the
hooks 4 to a solid area of the wall or
pillar.
1
Band (3)
4
Hook (2)
2
Screw (3)
5
Hook securing
screw (2)
3
Wood screw (3)
1
Band (2)
2
Screw (2)
3
Wood screw (2)
4
Clamp (2)
Nominal diameter
4 mm x 12
• Securing method
Summary of Contents for TH-50PX600U
Page 34: ...66 67 Note Note...
