16
AUDIO
L
R
SERVICE ONLY
CableCARD
TM
CARD TOP
(Turn Card upside down and gently insert it.)
AUDIO
Cable In
DEDICATED DISPLAY OUT
ANTENNA
A
B
DIGITAL AUDIO OUT
L
R
L
L
P
B
L
P
B
P
R
R
P
R
2
AUDIO
AUDIO OUT
COMPONENT VIDEO INPUT
PROG OUT
INPUT
AUDIO
AUDIO
L
R
VIDEO
S VIDEO
1
Y
Y
R
R
2
1
AUDIO OUTPUT
HDMI signal out
R
L
Connection
HDMI Connection
HDMI
∗
1
(High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supports
uncompressed standard. The HDMI terminal supports both video and audio information.
To the HDMI
∗
1
input terminal, you can connect an EIA/CEA-861/861B
∗
2
compliant consumer electronic device, such as a
Set Top Box or DVD player with HDMI or DVI output terminal.
Input a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to this HDMI terminal, so you can
display the high-definition pictures on this TV in the digital form.
∗
1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
∗
2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video including
high bandwidth digital content protection.
∗
3. Consult your consumer electronics dealer for availability details.
[for USA]
HDMI-DVI conversion cable (TY-SCHO3DH): available on Panasonic Website (www.panasonic.com).
Notes:
• An audio cable should be connected only when using a HDMI conversion adapter to connect with a DVI cable.
• If the external device has DVI output only, use a DVI to HDMI adapter cable
∗
3
to connect to the HDMI terminal.
• Connect the audio cables to the AUDIO IN terminals for HDMI.
• Select the audio setting in HDMI In (see page 29).
This input terminal is not intended for use with computers.
Notes:
• This HDMI connector is Type A.
• If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO or VIDEO
input terminal on the TV so you can enjoy an analog signal.
• The DIGITAL IN terminal can only be used with 1080i, 480i or 480p picture signals. Set the Digital Set -Top -Box DIGITAL
OUT terminal Output setting to 1080i, 480i or 480p. For detailed information, refer to the Digital Set -Top -Box instruction
manual. If you cannot display the picture because your Digital Set -Top -Box does not have a DIGITAL OUT terminal
Output setting, use the component Video Input (or the S Video Input or Video Input). In this case the picture will be
displayed as an analog signal.
HDMI cable
Set Top Box
DVD player
Audio cable
1080i
480p
480i
No. of dots (H
×
V)
1,920
×
1,080i
720
×
480p
640
×
480p
720(1,440)
×
480i
Vertical scanning frequency (Hz)
59.94/60
59.94/60
59.94/60
59.94/60
Compatible VIDEO Signal
Compatible sampling frequency of AUDIO signal through HDMI (L.PCM) : 48kHz / 44.1kHz / 32 kHz
