background image

English

8

 

 CAUTION

 If problems or malfunction occur, stop using 
immediately.

 

 If problems occur, unplug the power supply 
plug.

 

 Smoke or an abnormal odour come out from the unit.

 

 No picture appears or no sound is heard, 
occasionally.

 

 Liquid such as water or foreign objects got inside the 
unit.

 

 The unit has deformed or broken parts.

 If you continue to use the unit in this condition, it 
could result in fire or electric shock.

 

 Turn the power off immediately, unplug the power 
supply plug from the wall outlet, and then contact the 
dealer for repairs.

 

 To cut off the power supply to this Display completely, 
you need to unplug the power supply plug from the 
wall outlet.

 

 Repairing the unit yourself is dangerous, and shall 
never be done.

 

 To enable to unplug the power supply plug 
immediately, use the wall outlet which you can reach 
easily.

 

 Do not touch the unit directly by hand when 
it is damaged.

 Electric shock could occur.

 

 When using the LCD Display 

 Do not bring your hands, face or objects close to the 
ventilation holes of the Display.

 

 Heated air comes out from the ventilation holes at the 
top of Display will be hot. Do not bring your hands or 
face, or objects which cannot withstand heat, close to 
this port, otherwise burns or deformation could result.

 At least 2 people are required to carry or unpack 
this unit.

 

 If this is not observed, the unit may drop, resulting in 
injury.

 Be sure to disconnect all cables before moving the 
Display.

 

 If the Display is moved while some of the cables are 
still connected, the cables may become damaged, 
and fire or electric shock could result.

 Disconnect the power supply plug from the wall 
socket as a safety precaution before carrying out 
any cleaning.

 

 Electric shocks can result if this is not done.

 Clean the power cable regularly to prevent it 
becoming dusty.

 

 If dust built up on the power cord plug, the resultant 
humidity can damage the insulation, which could 
result in fire. Pull the power cord plug out from the 
wall outlet and wipe the mains lead with a dry cloth.

 Do not step on, or hang from the display or the 
Pedestal.

 

 They might tip over, or might be broken and it may 
result in injury. Pay special attention to the children.

 Do not reverse the polarity (+ and -) of the battery 
when inserting.

 

 Mishandling the battery may cause its explosion 
or leakage, resulting in fire, injury or damage to 
surrounding properties.

 

 Insert the battery correctly as instructed. (see page 
14)

 Remove the batteries from the remote control 
transmitter when not using for a long period of time.

 

 The battery may leak, heat, ignite or burst, resulting in 
fire or damage to surrounding properties.

 Do not burn or breakup batteries.

 

 Batteries must not be exposed to excessive heat such 
as sunshine, fire or the like.

 Do not turn the Display upside down.
 Do not position the unit with its display panel facing 
upright.

 

Summary of Contents for TH-55AF1U

































Reviews: