24
English
LED turns to orange
≥
Panel maintenance may be in progress.
LED turns to orange again in standby mode when the
TV is turned on / off before the panel maintenance is
completed. (Be sure to turn the TV off with the remote
control to perform the panel maintenance.)
≥
During panel maintenance, avoid touching and
exerting any pressure on the screen. (e.g. wiping the
screen, etc.)
≥
For more information
The panel maintenance notification is displayed
when turning the TV off with Standby On / Off switch
of the TV’s remote control
≥
Perform the panel maintenance. Select [Turn the TV
off now] and press the OK button to start the panel
maintenance.
≥
The panel maintenance is interrupted when selecting
[Don’t start panel maintenance this time] or turning the
TV off while the notification is displayed.
The notification is displayed again when turning the
TV off with Standby On / Off switch of the TV’s remote
control next time.
≥
For more information
A white horizontal line appears in Standby mode
≥
A white horizontal line may appear on the screen for a
while to adjust the panel. This is not a malfunction.
Maintenance
First, remove the mains plug from the
mains socket.
Regular care:
Gently wipe the surface of the display panel, cabinet, or
pedestal by using a soft cloth to remove dirt or
fingerprints.
For stubborn dirt:
(1) First clean the dust from the surface.
(2) Dampen a soft cloth with clean water or diluted
neutral detergent (1 part detergent to 100 parts
water).
(3) Wring out the cloth firmly. (Please note, do not let
liquid enter the TV inside as it may lead to product
failure.)
(4) Carefully wipe moisten and wipe away the stubborn
dirt.
(5) Finally, wipe away all the moisture.
≥
Do not use a hard cloth or rub the surface too hard,
otherwise this may cause scratches on the surface.
≥
Take care not to subject the surfaces to insect
repellent, solvent, thinner or other volatile substances.
This may degrade surface quality or cause peeling of
the paint.
≥
The surface of the display panel is specially treated
and may be easily damaged. Take care not to tap or
scratch the surface with your fingernail or other hard
objects.
≥
Do not allow the cabinet and pedestal to make contact
with a rubber or PVC substance for a long time. This
may degrade surface quality.
Wipe the mains plug with a dry cloth at regular intervals.
Moisture and dust may cause fire or electrical shock.
Display panel, Cabinet, Pedestal
Mains plug
Caution
TH-55_65JZ980Z_Eng_TQB4GA0053.book 24 ページ ２０２１年４月５日 月曜日 午後１時５４分
