42
SETUP
Colour system
' % +
Colour system
Auto
J+
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low level
or noisy input signals the image may in rare cases become
unstable. Should this occur, set the system to match the format
of the input signal.
Colour system:
J + :J?J
selected from NTSC/PAL/SECAM/NTSC 4.43/PAL M/PAL N.
J!_ :+
Auto
SECAM
NTSC
PAL M
PAL N
NTSC 4.43
PAL
Cinema reality
Cinema reality:
When On, the display attempts to reproduce a more natural interpretation of sources such as movie
pictures, which are recorded at 24 frames per second.
If the picture is not stable, turn the setting to Off.
Note:
$ When On, this setting only affects the following signal input:
$ NTSC / PAL signal input during Video input signal.
$ 525i(480i), 625i(575i), 1125(1080)/60i signal input during Component input signal.
y
Cinema reality
Off
J+
Press to set On/Off.
XGA Mode
This menu is displayed when the input signal is analog (Component/PC).
?J'; ?_<`G'[ JG ''
{^:_] ¦_<`:^:]_ ¦_<` ^: ¦_<`@+
XGA Mode
1024 × 768
;*+
^_] :^]_ :^ +
Note:
$ '& :&\ {@
necessary.
Noise reduction
Reduces picture noise.
(
)
Noise reduction
Off
" +
K''::* :*:*+
Auto:
" ?J'* :
**+
