53
SETUP
Screensaver (For preventing image retention)
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each.
&«&J«J«!J«
Setup
1/2
Signal
Display ID settings
Monitor out(Digital)
Auto
Multi display settings
Backup input settings
Screensaver
Input label
ECO mode settings
Wobbling
Off
DIGITAL LINK out
Power ON screen delay
OSD language
English(UK)
Press to select the Screensaver.
Screensaver
Present time
SUN
99 : 99
Start
Mode
Off
Press to display the Setup menu.
1
2
Press to select the Screensaver screen.
3
Mode selection
Press to select the
Mode.
Off
Interval
: Operates when Periodic Time and Operating
Time are set up and those times arrive.
Time Designation
: Operates when Start Time and Finish Time are
set up and those times arrive.
Standby after SCR Saver : Operates while Screensaver duration, and display
enters standby mode.
On
: Operates when Start is selected and the ENTER
button is pressed.
Press to select each
mode items.
Start setting
4
When the Mode is set to On, press to select Start.
Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated.
To stop the
Screensaver under On, press the RETURN
button or any buttons on the main unit.
Note:
$ When the display is turned off, the Screensaver will be deactivated.
