86
USB Media Player
3. Network environment (Multi Media Player only)
`$ J}^*!
As mentioned below, connect several units of LFV70 together with LAN cables and set up IP addresses / Subnet masks
?&+
Master
IP address:
Subnet mask:
192.168.10.1
255.255.255.0
192.168.10.2
255.255.255.0
192.168.10.3
255.255.255.0
192.168.10.4
255.255.255.0
Slave
Slave
Slave
Hub or boradband router
*Precautions
G ?&' :J ? J[ +
With a router put in between, you cannot set up connection. Use them within the same subnet.
?& K"+
4. Procedures for starting / ending Media Player
4.1. For Single Media Player
Starting procedure
(1) Insert USB memory for Media Player.
*See chapter 2
(2) Run a USB memory contents check.
*See chapter 2.6
If an error arises, repeat the check until the error is eliminated.
(3) Change INPUT to USB.
Ending procedure
(1) Change INPUT to other than USB.
4.2. For Multi Media Player
Starting procedure
(1) Connect several units of LFV70 with LAN cables.
*See chapter 3
(2) Insert USB memory for Media Player into each LFV70.
*See chapter 2
(3) Run a USB memory contents check on each LEV70. *See chapter 2.6
If an error arises, repeat the check until the error is eliminated.
(4) Change INPUT for Master to USB.
Ending procedure
Change INPUT for Master to other than USB.