15
INPUT
MENU
ENTER/
+
/
VOL
-/
Basic Controls
Main Unit
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu
screen will switch. (see page 17)
Normal Viewing
Picture
Sound
Pos. /Size
Setup
INPUT button
(INPUT signal selection)
(see page 14)
Volume Adjustment
Volume Up “+” Down “–”
When the menu screen is
displayed:
“+” : press to move the cursor up
“–” : press to move the cursor down
(see page 17)
Enter / Aspect button
(see page 17)
Remote control sensor
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will
still consume some power as long as
the power cord is still inserted into the
wall outlet.)
• Standby ........ Red
Orange (When “Slot power” is set to
“On”.)
Orange (Depending on the type of
the function board installed, when the
power is supplied to the slot)
Orange (When “Control I/F Select” is
set to “LAN”.)
• Power-ON ...... Green
• PC Power management (DPMS)
..........................Orange (With PC input signal.)
When this function is set to On, it operates under the following conditions to turn the power on
or off automatically.
When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signal
input:
→
Power is turned off (standby); the power indicator lights up orange.
When pictures (HD/VD sync signals) are subsequently detected:
→
Power is turned on; the power indicator lights up green.
• DVI-D Power management
..........................Orange (With DVI input signal.)
When this function is set to On, it operates under the following conditions to turn the power on
or off automatically.
When no pictures (sync signal) are detected for 30 or so seconds during DVI signal input:
→
Power is turned off (standby); the power indicator lights up orange.
When pictures (sync signal) are subsequently detected:
→
Power is turned on; the power indicator lights up green.
