19
Network settings
4
Press ▼ to go to the next item.
In addition, further perform the following setting depending on “Authentication” and “Encryption” settings.
Default key
Key 2
*******
Key 1
*******
1
Key 3
*******
*******
Key 4
●
When setting “Open” or “Shared” as authentication and setting “WEP” as the
encryption method:
Default key
: Set 1 – 4 numerals for the default key.
Key1 – 4
: Set a WEP key to the key number selected with “Default key”.
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five
alphanumerics (or a 10-digit string for the hexadecimal format) for the 128-bit key,
input 13 alphanumerics (or a 26-digit string for the hexadecimal format).
●
When using “WPA-PSK” or “WPA2-PSK” :
Set a key.
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
●
When the authentication method is “WPA-EAP/WPA2-EAP”, “WPA-EAP”, “WPA2-
EAP”:
Set “EAP”, “User name”, and “Password”.
EAP:
Select the EAP setup in the RADIUS server. Types of EAP that can be selected are as
follows.
PEAP (MS-CHAPv2), PEAP (GTC), EAP-TTLS (MD5),
EAP-TTLS (MS-CHAPv2), EAP-FAST (MS-CHAPv2), EAP-FAST (GTC)
User name:
Input a user name used for authentication (excluding spaces) (maximum
64 characters).
Password:
Input a password used for authentication (maximum 64 characters).
Entering characters
page 21
•
If you are unable to connect to the wireless LAN through the access point, contact the manufacturer of
the access point.
•
When using EAP, the display needs to be set according to the setting of the RADIUS server. Check with
the network administrator for the setting of the RADIUS server.
•
When using an EAP together with an access point with invalid SSID broadcast, select WAP-EAP or
WAP2-EAP for the authentication method even if the authentication method of the access point is WPA-
EAP/WPA2-EAP.
5
Select “Save” and press
button.
Save the current network settings.
■
Default settings of “USER1” - “USER3”
The following settings as “USER1” - “USER3” in the “Wireless LAN” are set before the Display leaves the
factory.
SSID
Panasonic Display
Authentication
Open
DHCP
Off
Encryption
None
IP address
192.168.11.100
Subnet mask
255.255.255.0
Gateway
192.168.11.1