31
Using Web Browser Control
Basic control page
To move from another page, click “Display control”, then “Basic control”.
3
4
1
2
1
Power On/Off control
2
Use these to select the input signals
3
Operation of AV mute
4
Switches aspect mode
The button display changes depending on the connection status of video equipment.
The following points will be different when connected wirelessly.
•
Switching to MIRRORING and MEMORY VIEWER input will not be possible.
•
Control will not be possible with Crestron Connected™.
TH-80BF1U, TH-65BF1U, TH-50BF1U,
TH-80BF1W, TH-65BF1W, TH-50BF1W
•
When “Wireless network standby” is off, operation for turning the power on/off will not be shown.
TH-80BF1E, TH-65BF1E, TH-50BF1E
•
“Wireless network standby” function is not supported, and operation for turning the power on/off will not be shown.
Detail control page
Click “Display control”, then “Advanced control” to display the Detail control page.
3
1
2
1
Enter a command. Use the same command used for the serial control.
(refer to “Operating Instructions, Display Operations”)
2
Response from the unit is displayed.
3
Command is sent and run.
•
After the settings are changed, it may take a while till the display status is displayed.