Speaker control
Speaker Selection
Features available
(Using VIERA Link Menu)
38
VIERA Link “
Control™”
You can control the theatre speaker with this TV remote control by pointing at the TV’s signal
receiver.
If you cannot operate, check the settings and the equipment “VIERA Link features and
connections” (p. 32 - 33)
Access and control the speaker volume
set
1
Display “VIERA Link Menu”
3
Set to “Home Cinema” or “TV”
2
Select “Speaker Selection”
Direct TV Rec
Speaker Selection
VIERA Link Menu
Home Cinema
Start
VIERA Link Control
Speaker Selection
Home Cinema
Recorder
Pause Live TV
Start
select
These functions may not work properly depending on the connected equipment.
Image or sound may not be available for the first few seconds when input mode is switched.
Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre
or Amplifier. Read the manual of the equipment.
“HDAVI Control 4” is the newest standard (current as of December, 2008) for HDAVI Control
compatible equipment. This standard is compatible with conventional HDAVI equipment.
To confirm this TV’s version of HDAVI Control “System Information” (p. 21)
Note
If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch)
via an Amplifier, connect with HDMI cable (p. 33), and then select
“Home Cinema”. To enjoy the sound from the DIGA Recorder in multi-
channel sound, connect an HDMI cable from the DIGA Recorder to
the Amplifier (p. 33).
Note
Home Cinema
Player theatre, Blu-ray Disc theatre or Amplifier will be automatically
turned on if it is in Standby mode and the sound is from theatre
speakers connected to the equipment.
Volume up / down
Volume slide bar will be displayed when
adjusting the volume of the equipment.
Mute
The sound of TV speakers is mute.
When the equipment is turned off, TV speakers will be active.
TV
TV speakers are active.
TH-L32X10&18KMRSX_EN.indb 38
TH-L32X10&18KMRSX_EN.indb 38
4/30/09 9:11:40 AM
4/30/09 9:11:40 AM
