T
imer Programming
47
4
Store
■
To change a timer programming event
Select the programme to be changed
access
select
Correct as necessary
(p. 46)
■
To cancel a timer programming event
Select the programme to be deleted
R
■
To record with subtitles (if available)
Select the programme to record with subtitles
Y
•
Each time pressed:
auto
off
■
To cancel a timer programming event
temporarily
Select the programme to be cancelled
B
•
Each time pressed:
cancel
stop cancelling
Note
•
Check that the LED is orange. If not, timer programmes are not active or not stored.
•
Timer Programming reminder messages will remain displayed until one of the following occurs:
• You press the OK button to view the programme or the EXIT button to cancel the reminder.
• The timer programming event that the reminder is set for ends.
•
“!” identifies that any timer programming events have overlapped. [USB HDD Rec.] / [SD Card Rec.] are
given priority over [Reminder]. As for the overlapped two or more [USB HDD Rec.] / [SD Card Rec.], the
first timer programming event starts and finishes as programmed. The next timer programming event
can then start.
•
The recording of Timer Programming will automatically change to the programmed channel
10 seconds before the start time.
•
To stop recording the timer programming event directly prior to the start time, it may be necessary to
stop the recorder manually.
•
The recording of Timer Programming will be performed even if the TV is in REW LIVE TV recording
(p. 56) or Pause Live TV recording (p. 81). In this case, these recordings will be cancelled.
