About pH level standard
Check whether the alkaline ion water has reached to the range of “pH level standard”.
Please regularly use the pH test liquid to measure the level.
(Standard check frequency: more than 1 time every month)
Water
quality
Weak
acidic
Alkaline ion water
Purified
water
Weak
Mild
Strong
pH level
standard
5 ~ 6.5
8 ~ 9
8.5 ~ 9.5
Between
9 ~ 10
Water that is
not electrolyzed
Installation 2
Check after installation
Installation 3
Measure and adjust the pH level of water
To exhaust the air in the main unit, the purified water
shall be drained for 5 minutes.
To use the concealing Alkaline Ionizer
(P.EN16)
❶
Press
Purified
.
❷
Press
Water
Stop/Flow
.
The blue water signal indicator will flash for about 20 ~ 30 seconds and
then stabilize at on state.
If the air in the main unit is not completely exhausted, the water flow
will not be smooth.
After the Alkaline Ionizer has been installed or after it has not been used for a prolonged period
(generally, a week or more), be absolutely sure to measure the pH level, and check that it is within the
“pH standard” before using the Alkaline Ionizer.
Remember to measure the pH level periodically (at least once a month).
What is the pH level (ion concentration)?
The pH level indicates the degree of alkalinity, neutrality or acidity of
water (aqueous solutions), and stands for “hydrogen ion exponent.”
Note
4
5
6
7
8
9
10
Neutrality
pH
Acidic
Alkaline
Strong
Strong
Mild
Mild
EN12
01_TK-AB50-ZEX_ZMA_EN.indd 11
2018/09/28 14:49:01