Water supply
Handling of pH test liquid
(
P.EN11, EN13
)
Usage
Usage
Operating Precautions
Do not drink water in case of the following
conditions.
Water which is very turbid. Water containing a
great deal of red rust.
( Doing so may shorten the service life of the
cartridge.)
Well water near sea coast.
(Doing so may cause malfunction.)
To use in areas* where the hardness of
tap water is high, the slightly acidic water
should be discharged for about 1 minute
before using every day.
( Or the calcium will attach on the main spout and
water run through path, which may lead to poor
water run through condition.)
* In areas where the hardness of water is high, the
foaming state of soap is poor, and white matter
(calcium) will attach to teapots and pots.
Due to the quality of tap water in the
residential area, the pH level of the water
may not be adjusted to the specified level.
Do not use the unit continuously for more
than 30 minutes to generate alkaline ion
water or acidic water.
When the using time of the unit exceeds 30 minutes*
2
, a
“PI-PI-PI-” warning sound will be made and the water supply
will be automatically stopped to protect the Alkaline Ionizer.
*
2
When using “alkaline ion water (strong)” , “weak
acidic” hydrogen adjustment mode; if the mode
is “alkaline ion water (mild)” , “alkaline ion water
(strong)” , the using time is about 15 minutes.
→
Please press
Water
Stop/Flow
again after 3 minutes.
Do not place the main unit or piping part in
freezing condition.
( To avoid the occurrence of damage, water leakage or fault)
The specification of this Alkaline Ionizer is not
applicable for cold region.
When the main unit or piping part of the unit is frozen,
please close the water stop valve, and contact a dealer
or subordinate service station of Panasonic for handling.
Do not let the movable part or door of a
lifting cabinet touch the outlet pipe.
Do not spray insecticide to the main unit, water
hose or other parts of the Alkaline Ionizer.
(Faults may occur.)
In case of accidental spray, please wipe with wet
cloth immediately.
When cooking rice with alkaline ion water,
the rice will be softer if the pH level of the
alkaline ion water is higher.
Please adjust the water volume or the strength level
“alkaline ion water (weak) ~ (strong)” in accordance
with your personal preference. (suggestion: pH level
should be 9.0 or lower than 9.0)
In addition, the specified pH level may not be
reached due to the difference of region and the
quality of water source. For water source that may
lead to higher pH level, please use the “alkaline ion
water(weak)”or“purifiedwaterˮfunction.(P.EN16)
Do not take the drain cock off.
( Otherwise the water leakage inspector may not be
responsive.)
The bottom of the main unit
Drain cock
Do not crash the main unit, control panel, outlet
pipe or drain pipe of the Alkaline Ionizer with
cutting board, cook pot or other heavy objects.
(To avoid the occurrence of fault)
Do not fasten the outlet pipe nut of the
special faucet for Alkaline Ionizer with tools.
(To avoid the occurrence of damage or water leakage)
Do not put cook pot or other objects with
high temperature close to the special faucet
for Alkaline Ionizer.
(To avoid the occurrence of deformation and fault)
Do not place the main unit upside down.
(To avoid the occurrence of fault)
Do not block the drain outlet when using the
Alkaline Ionizer.
(To avoid the occurrence of fault)
Store the pH test liquid in a place
without direct sunlight.
( Or it cannot make correct measurement due
to color change.)
To dispose of the pH test liquid,
dilute it with water before pouring
it down the drain.
EN8
01_TK-AB50-ZEX_ZMA_EN.indd 7
2018/09/25 16:49:15
