EN15
Installation 3
Attaching the bypass selector
Keep all parts that are not used during installation, as they may be needed later if the unit is moved or the faucet
is changed.
Outside-screwed faucet
• Water faucet which can attach the Alkaline
Ionizer without an accessory.
1
Remove the nut and adaptor.
Nut
Adaptor
(with gasket)
Gasket
Do not remove the gasket
and the fi lter inside the
bypass selector.
If these are moved, return
to the original position.
Make sure foreign matter is
not attached to the fi lter and
the gasket is not inclined.
Gasket and Filter
2
Attach the nut and adaptor.
1
2
Nut
Adaptor(with gasket)
3
Attach the bypass selector and
tighten the nut until the bypass
selector does not turn.
Do not use any tools. (This may
damage the nut.)
Make sure the bypass selector is
not inclined.
1
2
Bypass selector
Nut
Aerator (not used)
Do not use the
removed aerator.
Ins
tal
lation
Engli
sh
TK-AS700_En.indb 15
TK-AS700_En.indb 15
2022/04/14 18:17:42
2022/04/14 18:17:42