EN16
Installation 3
Attaching the bypass selector
(continued)
Keep all parts that are not used during installation, as they may be needed later if the unit is moved or the faucet
is changed.
Inside-screwed faucet
• Water faucet which can attach the Alkaline
Ionizer with an accessory.
Aerator (not used)
Do not use the removed aerator.
1
Remove the nut and adaptor.
Nut
Adaptor
(with gasket)
Gasket
Do not remove the gasket
and the fi lter inside the
bypass selector.
If these are moved, return
to the original position.
Make sure foreign matter is
not attached to the fi lter and
the gasket is not inclined.
Gasket and Filter
2
Screw in the bushing. Insert into
the adaptor.
Bushing (Accessory)
Gasket
Adaptor
3
Attach the nut and adaptor.
The adaptor should be screwed on
straight. Screwing it on tilted may
strip the threads, resulting in water
leaks.
1
2
Nut
Gasket
Adaptor
4
Attach the bypass selector and
tighten the nut until the bypass
selector does not turn.
Do not use any tools. (This may
damage the nut.)
Make sure the bypass selector is
not inclined.
Nut
Bypass selector
TK-AS700_En.indb 16
TK-AS700_En.indb 16
2022/04/14 18:17:43
2022/04/14 18:17:43