EN17
Keep all parts that are not used during installation, as they may be needed later if the unit is moved or the faucet
is changed.
Faucet without an aerator
• Water faucet which can attach the
Alkaline Ionizer with accessory.
Bulge
1
more than 10 mm
2
13 mm or more, less than 24 mm
1
Remove the nut and adaptor.
Nut
Adaptor
(with gasket)
Gasket
Do not remove the gasket
and the fi lter inside the
bypass selector.
If these are moved, return
to the original position.
Make sure foreign matter is
not attached to the fi lter and
the gasket is not inclined.
Gasket and Filter
2
Insert the installation adaptor,
and tighten it with the nut.
Nut
Remove the screws
(4 pcs.)
Installation adaptor
(Accessory)
3
Tighten the 4 screws temporarily
and loosen the nut to leave a 3 ~
4 mm gap.
Nut
3 ~ 4 mm
Screws
(4 pcs.)
4
Push the bypass selector against the faucet
and install the 4 screws as shown below.
Top view
1
Water faucet
2
Installation adaptor
3
Screws
<OK> <NG>
Water faucet
Bypass selector
5
Tighten the nut until the bypass
selector does not turn.
Do not use any tools. (This may
damage the nut.)
Make sure the bypass selector is
not inclined.
Nut
Ins
tal
lation
Engli
sh
TK-AS700_En.indb 17
TK-AS700_En.indb 17
2022/04/14 18:17:44
2022/04/14 18:17:44