54
LAN
Enabling the Power On by LAN function
The computer automatically turns from off to on when the computer is accessed from the network server via the internal LAN
port.
1
Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility
2
In [Caution], press
Enter
.
3
Press
F10
, and then select [Yes] and press
Enter
.
4
Log on to Windows as an administrator.
5
Click (Start) - [Computer] - [System Properties] - [Device Manager], double-click [Net-
work adapters] - [Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller], and click
[Advanced].
6
Click [Wake From Shutdown] in [Property] and select [On] in [Value], and then click [OK].
NOTE
z
The computer may accidentally turn on if the linkage status is changed. To prevent the accidental startup, make the
setting by the following steps.
A
Click
(Start) - [Computer] - [System Properties] - [Device Manager], double-click [Network adapters] - [Marvell
Yukon 88E8055 PCI-E Gigabit Ethernet Controller], and click [Advanced].
B
Click [Wake Up Capabilities] in [Property] and select [Magic Pocket] in [Value], and then click [OK].
