79
Disabling/Enabling Wireless Communication
<Only for model with wireless LAN, Bluetooth, and/or wireless WAN>
There are 5 ways of disabling and enabling wireless communication.
The wireless switch on the left side of the computer (below)
Wireless Switch Utility (
)
Settings in the Network and Sharing Center (
Settings in the [Advanced] menu of the Setup Utility (
)
Setting in the Wireless Connection Disable Utility (
NOTE
For further information about Wireless LAN: (
For further information about Bluetooth: (
For further information about Wireless WAN: Refer to the instruction manual of the wireless device.
The wireless communication is also enabled or disabled by connecting or disconnecting the LAN cable. (
)
1
Open the cover.
A
Slide the latch (A) to the right to unlock the cover.
B
Slide the latch (A) down, and open the cover.
To disable all wireless communication
2
Switch (B) to OFF
To enable wireless communication
2
Switch (B) to ON
In the default setting, the wireless switch enables all wireless devices when it is
set to ON.
The Wireless Switch