25
T
roubleshooting
12
When the message [Press F2 to enter SETUP] is displayed,
press
F2
and then run the Setup Utility.
If the password has been set, enter the Supervisor Pass-
word.
13
Press
F9
.
At the confirmation message, select [Yes] and press
Enter
. (The Setup Utility settings will return to their
default values. Even the security settings with the excep-
tion of the password(s) will return to their default values.)
10
At the confirmation message , press
Y
.
The operation of reinstallation for the hard disk starts au-
tomatically.
When a message appears instructing you to insert the next
CD, insert the recovery CD showing the next number in
the sequence, and then select [OK].
Dual OS
In the case of Windows 2000, only Product Recovery CD-
ROMs 1 to 3 can be used.
11
After the reinstallation procedure completes, the follow-
ing message will appear on the display. Remove the re-
covery CD, then restart the computer by pressing
Ctrl
+
Alt
+
Del
.
If the message “The media does not contain the cor-
rect file” appears, select [OK]. A message will ap-
pear instructing you to insert the next CD.
Confirm that the proper recovery CD has been in-
serted by opening the tray of the CD drive and then
close the tray, then select [OK].
NOTE
Windows XP
Windows(R) XP Professional install wizard will start after reboot.
Remove the Product Recovery CD-ROM, then restart the computer
by pressing
Ctrl + Alt + Del(Delete).
*
2
Windows(R) 2000 Professional install wizard will start after reboot.
Remove the Product Recovery CD-ROM, then restart the computer
by pressing
Ctrl + Alt + Del(Delete).
*
1
Windows 2000
NOTE
If there are added functions that are not listed in the
Specifications of this Operating Instructions, we rec-
ommend disabling their device settings. If the settings
are enabled, additional operations may be necessary
during the Windows setup procedure. (We also rec-
ommend referring to the Supplementary Instructions,
if they are included with the computer.)
14
Using either or , select [Exit] and then select
[Save Current Values], then press
Enter
.
At the confirmation message, select [Yes] and press
Enter
.
15
Turn the computer off by rotating the power switch, and
then turn the computer on.
16
Perform the setup procedure for Windows by following
the instructions on the screen.
(Refer to the Supplementary Instructions, if they are in-
cluded with the computer.)
Windows 2000
Page 11
Windows XP
page 12
17
Run the Setup Utility and change the settings where nec-
essary.
*
1
Dual OS
Windows(R) 2000 Professional install wizard will start after reboot.
Restore process will execute more after Windows(R) 2000 Professional
install wizard.
Restart the computer after removing Product Recovery CD-ROM.
*
2
Dual OS
Windows(R) XP Professional install wizard will start after reboot.
Restore process will execute more after Windows(R) XP Professional
install wizard.
Restart the computer after removing Product Recovery CD-ROM
Summary of Contents for Toughbook CF-28 Series
Page 34: ...34 Memo...
Page 35: ...35...
