Panasonic Toughbook CF-28 Series, Supplementary Instructions Manual

9

LAN Port 

WARNING

Do not insert a telephone line connector (including a
PBX internal phone) into the LAN port.  Doing so
may cause fire or electric shock.

Using  LAN

This model has an internal LAN port.
When using the LAN, set [LAN] to [Enable]

*

 in the Setup Utility.  (

*

 Default)

<Only for models with LAN port>

NOTE

Do not use standby or hibernation functions during communications.
Unable to connect to network (When the indicator of your HUB unit does not light):

      Windows 98

1

Select [Network] in [Start] - [Settings] - [Control Panel].

2

Select [Intel 8255x-based PCI Ethernet Adapter (10/100)].

3

Select [Properties].

4

Select [Advanced].

5

Select [Link Speed & Duplex] from [Property], set [Value] to the communication speed (10
Mbps or 100 Mbps) suitable for your network environment, and then press [OK].

Windows NT

1

Select [Adapters] in [Start] - [Settings] - [Control Panel] - [Network].

2

Select [Intel 8255x-based PCI Ethernet Adapter (10/100)].

3

Select [Properties] - [Advanced].

4

Select [Link Speed & Duplex] from [Setting], set [Value] to the communication speed (10 Mbps
or 100 Mbps) suitable for your network environment, and then press [OK].

   Windows 2000

1

Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] - [Hardware].

2

Select [Intel 8255x-based PCI Ethernet Adapter (10/100)] from [Network adapters].

3

Select [Action] - [Properties].

4

Select [Advanced].

5

Select [Link Speed & Duplex] from [Property], and set [Value] to the communication speed (10
Mbps or 100 Mbps) suitable for your network environment, and then press [OK].