37
SD Security
Inserting a specific SD Memory Card can work as an alternative to entering password in the cases below. Format the card
and make the necessary settings.
z
Starting up the computer
z
Resuming the computer from standby/hibernation or screensaver
z
Logging on to Windows
NOTE
z
You can start up the computer by entering the Supervisor Password or User Password when you do not use the SD
Memory Card.
z
Use the formatted SD Memory Card (
).
z
This function works only with the SD Memory Card slot. It does not work with other devices such as an SD card
reader/writer connected through USB port.
z
You cannot use this function together with the fingerprint security (optional).
z
You can use the setup SD Memory Card as an ordinary card on the computer and other devices.
z
You can use a single setup SD Memory Card for multiple computers. However, when using the card to log on to Win-
dows, you need to use the same logon user and the same password on all of the computers.
Preparation
z
To start up the computer
Set the Supervisor Password in the Setup Utility (
). (You can also set it during the initialization procedure.)
z
To use to log on to Windows or to resume from standby/hibernation/screensaver
Set the Windows logon user and the password in [Control Panel] in advance. For further information, refer to the Windows
Help.
1
Log on to Windows as an administrator.
2
Insert the SD Memory Card in the SD card slot.
If [Secure Digital storage device] appears, click [Take no action], then click [OK].
3
Start the SD Card Setup program.
Click [start] - [All Programs] - [Panasonic] - [SD Card Setup].
4
Click [Next] in the Welcome screen.
SD Card Setup
