36
PC Card / ExpressCard
You can insert the following cards.
z
ExpressCard/34 or ExpressCard/54 to the ExpressCard slot (A)
(Only for model with ExpressCard slot)
z
PC Card Type
I
(3.3
mm
) or
II
(5.0
mm
) to the PC Card slot (B)
NOTE
z
The following types of card are not supported:
PC Card Type
III
(10.5
mm
), ZV card, SRAM card, FLASH ROM card (excluding ATA interface type), and other cards
that require 12 V of operating voltage.
z
Do not start up Windows with a storage type of CardBus PC card attached. An error may occur.
Preparation
z
Attach the device for the media containing the card driver (e.g., CD-ROM). Equipment connected to the multimedia
pocket cannot be recognized if connected after the card driver installation screen appears.
To insert the card
1
Open the cover (C), and insert the ExpressCard (D) or the PC
Card (E) with the label side up until it securely fits in to the slot.
z
For further information, refer to the instruction manual of the card.
To remove the card
1
Disable the card function.
A
Click
on the notification area and click
.
B
Select the card.
A
Double-click
on the notification area and select the card, then click [Stop].
B
Follow the on-screen instructions.
z
These steps are not necessary when removing the card after turning off the computer.
Inserting/Removing the Card
