background image

36

Appendix

Hard Disk Backup Function

<To create a backup area and divide hard disk into two partitions, for OS and data>
Select [2], enter the partition size (GB), and press 

  Enter

   .

• You can cancel this operation by pressing   

 

0

   .

• The data partition size will be the maximum settable size less the number entered above.

The maximum settable size will differ depending on models.

9

At the confirmation message, press   

 

Y

   .

The backup area is then created.

10

When the message [You must reboot in order to enable the Backup function.] appears, remove
the Product Recovery DVD-ROM, and press any key to restart the computer. The computer is
restarted, then the backup process will begin.

11 

When the message [[Backup] is complete] appears, press   

Ctrl

 

  +   

Alt

   +   

Del

 

   to restart the

computer.

12

After logging on to Windows, a message will appear advising that a new device has been
installed and that the computer must be restarted to enable the settings.  Select [Yes] to restart
the computer.

The [Boot] menu in the Setup Utility is set to start up from the CD/DVD drive. Change this
setting if necessary.
The next time the backup or restore functions are executed, follow the procedure for 

“Back-

ing Up and Restoring Data

” (

 below).

NOTE

1

Turn the computer on, and press   

F2

   while [Panasonic] boot screen is displayed.

The Setup Utility will start up.
If a password has been set, enter the Supervisor Password or the User Password.

2

Select [Exit] menu, then select [Hard Disk Backup / Restore] and press 

 

Enter

   .

At the confirmation message, select [Yes], and press  

 

Enter

   .

Backing Up and Restoring Data

Before executing the backup function, execute a disk error check (

 page 34).

Do not interrupt the backup or restore functions before completion, for example by turning
off the power or pressing 

 

 

Ctrl

   +   

Alt

   +   

Del

 

 , as this may prevent Windows from

starting up, or may cause data to be lost so that the backup and restore functions cannot be
executed.

CAUTION

The usable hard disk area

[At the time of purchase]

[After the backup area is created]

The backup area

Cannot be accessed

from Windows.

Do not

 

press

  

 Ctrl

   +   

Alt 

  +   

Del 

  

until

 

the message is displayed.

CAUTION

Can be accessed from

Windows (Two partitions).

Summary of Contents for Toughbook CF-73SCVTSBM













































Reviews: