background image

51

Fingerprint Reader

Precautions

Security Functions

Fingerprint Authentication Technology does not guarantee complete authentication and individual identification. Please 
acknowledge we shall not be liable for any loss or damage whatsoever resulting from the use of, or inability to use your 
Fingerprint device. 
The Fingerprint authentication method uses multiple fingerprints, encryption keys, credentials data and passwords. You 
might not be able to use your data if you lose fingerprints, keys, credentials and passwords. Back up the Fingerprint 
authentication data in a safe place. For further information, refer to “Backup” (

page 55

).

General interaction with third-party applications: There is no guarantee that there will not be any negative interaction with 
any third-party software, and will not accept any responsibility for such an interaction.

1

TPM Installation

Refer to the 

Installation Manual

 of “Trusted Platform Module (TPM)”.

Click [start] - [Run] and input “c:\util\drivers\tpm\readme.pdf”, and click [OK].

2

Fingerprint Utility Installation

Performed by the Computer Administrator.

A

Log on to Windows as an Administrator.

B

Close all other programs.

C

Click [start] - [Run], enter “c:\util\drivers\fngprint\application\x86\install\setup.exe”, and click [OK].

D

Click [Next].
Installation starts. Follow the on-screen instructions.

E

When the “Protector Suite *.* has been successfully installed.” message appears, click [Finish].
At the confirmation message, click [Yes].
The computer restarts.

F

Log on to Windows as an Administrator.
The “Protector Suite QL Icon” 

 appears in the notification area.

Installation

Summary of Contents for Toughbook CF-74JCL02AM












































































































Reviews: