Panasonic Toughbook CF-F9KWH011M Reference Manual Download

Page: 76 / 205

CD/DVD Drive

Insert/Remove a disc.

To insert

With the title side of the disc (B) facing up, insert the disc under the keyboard.

Push down on the center of the disc until it clicks in place.
To remove

Press on the center spindle (C) and carefully lift up the edge of the disc.

Close the disc cover.

Press down the center of the disc cover (<CF-F9 series>position indicated “CLOSE”, <CF-S9 series>position of the
arrow.) to ensure that the cover is locked.

B C

<CF-F9 Series>

<CF-S9 Series>

<CF-F9 Series>

<CF-S9 Series>

Summary of Contents for Toughbook CF-F9KWH011M














































































































































































































Search results

Summary of Contents for Toughbook CF-F9KWH011M

Reviews:

Related manuals for Toughbook CF-F9KWH011M

Brands by name

Popular brands

Panasonic Toughbook CF-F9KWH011M, Reference Manual

Search results

Summary of Contents for Toughbook CF-F9KWH011M

Reviews:

Related manuals for Toughbook CF-F9KWH011M

Brands by name

Popular brands