92
Error Code / Message
Follow the instructions below when an error message or code appears. If the problem persists or if the error code/message is
not shown here, contact Panasonic Technical Support.
Error Code/Message
Solution
Bad System CMOS
An error has occurred in the memory of system settings. This occurs when the memory
content is changed by an unexpected program operation, etc.
z
Start the Setup Utility and return the settings to the default values, and then change the
settings as necessary.
z
If the problem persists, the internal clock battery may need to be replaced. Contact
Panasonic Technical Support.
System CMOS Checksum
Error
Invalid Year. System date
restored to 01/01/2009
The date and time settings are not correct.
z
Start the Setup Utility and set the correct date and time.
z
If the problem persists, the internal clock battery may need to be replaced. Contact
Panasonic Technical Support.
Press <F2> to enter setup
z
Write down the error details and press
F2
or
Del
to start the Setup Utility.
Change the settings if necessary. (
)
