16
Shutting Down
(power off)
Lightly press the power switch once (within 0.5 seconds).
CF-P2 shutdown is the same as the standby state of a com-
puter. (Standby state is a function allowing you to turn off
the power without closing applications. The settings before
the power was turned off are stored in the memory, so when
the power is turned back on, the screen is the same as it was
before the power was turned off (the same applications and
files are opened) and you can start working immediately.)
Check to see the SD card LED indicator if the SD card/MultiMedia Card is not
being accessed before turning off the power. If the power is turned off while the
card is being accessed, the data stored on the card may be damaged and the com-
puter may stop working properly.
Pop-up Menus
With pop-up menus, you can quickly choose an action for an item. For example, you can use
the pop-up menu in the contact list to quickly delete a contact, make a copy of a contact, or
send an e-mail message to a contact. The actions in the pop-up menus vary from program to
program.
Tap outside the menu to close it without performing an action.
Starting Up/Shutting Down
Power Switch
CAUTION
(1) To access a pop-up menu:
Tap and hold to display the pop-up menu.
(2) Lift the stylus and tap the action you want to perform.
