18
Align the touchscreen if the cursor does not correctly move to the position where the stylus
touches the touchscreen of the computer.
1
Tap
- [Settings] - [System] tab - [Screen]
and tap [Align Screen].
You can also align the screen when
+ center
of the cursor control are pressed.
2
"+" is displayed in the center, upper left, lower
left, lower right, and upper right portions of
the touchscreen, in that order.
Each time the "+" mark is displayed, tap the center of
the "+" mark with the stylus.
The alignment procedure is executed after the five
"+" marks are touched.
Handling the Touchscreen
Use the provided stylus with CF-P2. Do not use an implement other than the stylus pro-
vided with the computer.
Do not place any object on the surface or press down forcefully with sharp-pointed objects
(e.g., nails), or hard objects that may become damaged (e.g., pencils and ball point pens).
Do not operate the computer when such things as dust are on the LCD. Do not allow
substances such as oil to contact the LCD. The cursor may not work properly in such
cases.
Aligning the Touchscreen
LCD (Touchscreen)
When performing a full reset, the "+" mark may not move smoothly in this opera-
tion. This is not a malfunction. Continue the operation.
NOTE
