24
Select an input method
Input Panel Button
Tap to see your choice
Use the input panel to enter information in any program on CF-P2. You can either type using
the soft keyboard or write using Letter Recognizer, Block Recognizer, or Transcriber. In
either case, the characters appear as typed text on the screen.
To show or hide the input panel, tap the input panel button. Tap the arrow next to the input
panel button to see your choices.
Using the Input Panel
To type with the soft keyboard:
(1) Tap here and then [Keyboard].
(2) On the soft keyboard that is displayed,
tap the keys with your stylus.
Tap [123] to allow the keyboard to input $,
{}, %, etc.
Entering Information
Entering Numbers
There are two ways to enter numbers. If CF-P2 is in ABC or T9 mode, you can enter a
number by pressing the corresponding number key until a number is displayed. The num-
ber is entered, but CF-P2’s text entry mode doesn’t change.
You can also enter numbers by setting CF-P2 to 123 mode (by pressing
#
until
is
displayed). Setting CF-P2 to 123 mode is useful if you want to enter more than one or two
numbers—for example, street addresses or phone numbers. After setting CF-P2 to 123
mode, enter numbers by pressing the corresponding number keys. When you’re finished,
set CF-P2 back to previous mode (by pressing
until previous mode is displayed).
Moving the Cursor
You can move the cursor by pressing the right/left cursor control. However, the number of
characters that the cursor moves can vary—within T9 mode it generally moves word by
word and within ABC mode it moves letter by letter.
Deleting Text
You can delete text by pressing
. Each key press deletes the character left of the cursor.
(Example for [Keyboard])