43
Wireless Functions
Connecting to Wireless LAN
After finishing the first-time operation, make a connection setting for Wireless LAN us-
ing the following procedure.
Automatic network detection
A connection manager periodically scans wireless networks for available connections. If
any networks are detected and no networks are connected yet, the connection manager
will try to connect with a more favorable network first. If such a network cannot be used
or the connection manager cannot connect with any suitable network due to an invalid
WEP key, the connectivity bubble (A) is displayed for manual network connection. (
below)
If you don’t see the suitable network, tap [Settings] ( page 44, step (3)) to display the
detailed configuration window.
Wireless LAN communications are done via an antenna. Do not shield this antenna
with the hand, etc. This will negatively effect the performance of your wireless LAN
communications.
NOTE
If the connection manager is able to connect to a network automatically, the connec-
tivity bubble ( below) will not appear, and you can follow the steps described in
page 44 step (3) to access the connection manager.
NOTE
Connect to a Wireless LAN
(1) Select a network to connect to and what the network
will connect to, then tap [Connect] from the connectiv-
ity bubble.
(A)