15
Getting Started
Usef
ul Inform
ation
Troubleshooting
Appendix
z
You can change the user name, password, image and security setting after
setup of Windows.
z
Remember your password. If you forget the password, you cannot use the Win-
dows. Creating a password reset disk beforehand is recommended.
z
When you set date/time/time zone and click [Next], the screen may not go to the
next step for a few minutes. Do not touch the keyboard, touch pad or touch-
screen, and wait until the screen changes.
z
When using the included stylus, avoid touching the screen with you hands, etc.
This can cause input errors.
z
If “An unexpected error has occurred ...” (or a similar message) is displayed,
click [OK]. This is not a malfunction.
<Only for model with Windows XP Tablet PC Edition>
z
At “Welcome to Tablet PC”, you can learn the basic operations of Windows XP
Tablet PC Edition.
Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
Follow the on-screen instructions to create a account.
CAUTION
z
Remember your password. If you forget the password, you cannot use the Windows
operation system. Creating a password reset disk beforehand is recommended.
z
Before performing the calibration, close Tablet PC Input Panel.
NOTE
z
At first, log on to Windows as an administrator, and perform this calibration.
A
Run [Tablet PC Settings].
Click
(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
B
Click [Calibrate…].
C
If [User Account Control] is displayed, and click [Yes].
D
Using the stylus, touch each of the 16 “+” target marks one by one, and then
click [Yes].
NOTE
z
Perform the following calibration for each user.
A
Run [Tablet PC Settings].
Click
(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
B
Click [Calibrate…].
C
Using the stylus, touch each of the 4 “+” target marks one by one, and then
click [Yes].
<Only for model with Windows XP Professional>
A
Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen
Calibration Utility].
B
Touch the 9 “+” target marks sequentially with the stylus, and then press
Enter
.
C
Click [Save & Exit].
<Only for model with Windows XP Tablet PC Edition>
A
Click [start] - [Control Panel] - [Other Control Panel Options] - [Tablet Calibration].
B
Touch the 9 “+” target marks sequentially with the stylus.
C
Touch [OK] and restart the computer.
D
Click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and
Pen Settings].
6
Create a new account.
7
Perform the touchscreen calibration.
DFQW5372ZA_CF-T8mk4_7XP_OI_EN.book 15 ページ ２０１０年１月２２日 金曜日 午後５時１２分
Summary of Contents for Toughbook CF-T8EWATZJM
Page 38: ...38 MEMO...
Page 39: ...39...
