background image

99

Flash Memory Data Erase Utility

4

Press 

Fn

 + 

B

 (F10)

z

At the confirmation message, select [Yes] and press 

 (Enter).

 

The computer will restart.

5

Press and hold 

Fn

 + 

U

 (F2) or 

Fn

 + 

 (Del) while [Panasonic] boot screen is displayed.

The Setup Utility starts up.

z

If the password is requested, enter the Supervisor Password.

6

Set the Product Recovery DVD-ROM into the CD/DVD drive.

7

Select the [Exit] menu, then select your CD/DVD drive in [Boot Override].

8

Press 

 

(Enter).

z

The computer will restart.

z

If [Enter Password] is displayed during the following procedures, input the Supervisor Password or the User 
Password.

9

Press 2 to execute [2. [Erase HDD]].

z

To cancel this operation, press 

0

.

10

At the confirmation message, press 

Y

.

11

When [<<< Start menu >>>] is displayed, press 

 

(Enter).

The approximate time required for erasing data will be displayed.

12

Press 

Space

.

At the confirmation message, press 

 (Enter).

The hard disk erase process starts. When the operation is completed, the [Hard disk data has been deleted] mes-
sage will appear. If a problem has occurred during the operation, an error message will appear.

z

To cancel partway, press 

Ctrl

 + 

C

. The data erasure will be up to that point.

13

Remove the Product Recovery DVD-ROM, and then press any key to turn off the 
computer.

Summary of Contents for Toughbook CF-U1A1B1G2M


















































































































Reviews: