124
Troubleshooting (Advanced)
<Only for CF-F8/CF-W8 Series>
Disc playback and writing is not possible
z
Make sure the inserted disc is a compatible media type. For more about compatible media types, see “Disc Information”
(
z
You may need to clean the disc.
• Cleaning the disc (
z
Check whether the disc is distorted, damaged, or dirty.
z
When inserting a disc, follow the procedure below. Make sure the disc is inserted securely.
A
Slide the drive power/open switch, and open the disc cover.
B
Slide the disc into the drive under the keyboard with the label side up.
C
Press firmly on the center of the disc until you hear it click into place.
<Only for CF-F8/CF-W8 Series>
When a disc is inserted, it is not played automatically
z
Remove the disc and reinsert it.
• If an AutoPlay CD does not start after the computer resumes from the sleep or hibernation, remove the disc from the
drive, then reinsert the disc again after a 15 second wait.
z
Follow the procedure below.
A
Click
(Start) - [Control Panel] - [Play CDs or other media automatically].
B
Click right
of the item you want to automatically play and choose the action to play.
C
Click [Save].
If the problem persists, refer to the disc’s operating instructions or other sources to play the disc.
<Only for CF-F8/CF-W8 Series>
If the CD/DVD drive vibrates excessively or is noisy
z
Is the disc bent or labeled?
z
Check to see if the disc is inserted correctly, and is in good condition.
z
When writing to CD-R/RW using Roxio Creator LJB, you can minimize vibration while writing by using the writing speed at
[8x] or less.
