background image

10

Getting Started

Preparations

Precautions (Battery Pack)

z

Care should be exercised with regard to the following 
in order to avoid the possibility of overheating, fire or 
damage.

Avoid Heat

Do not throw the battery pack into a fire or 
expose it to excessive heat.

Keep Articles Away

Do not place the battery pack together 
with articles such as necklaces or hair-
pins when carrying or storing.

Do Not Disassemble

Do not insert sharp objects into the battery 
pack, expose it to bumps or shocks, 
deform, disassemble, or modify it.

Do Not Short

Do not short the positive (+) and negative 
(-) contacts.

Avoid Extreme Heat, Cold and Direct 
Sunlight

Do not charge, use or leave the battery 
pack for extended periods where it will be 
exposed to direct sunlight, in a hot place 
(in a car on a sunny day, for example), or 
in a cold place.

Do not charge the battery using the 
methods other than indicated in this 
manual

Do not use this computer with a bat-
tery pack other than the one specified 
(the one included with the computer or 
the specified battery pack sold sepa-
rately)

Do Not Use With Any Other Computer

The battery pack is rechargeable and 
was intended for the specified computer. 
Do not use it with a computer other than 
the one for which it was designed.

Do Not Put into a Microwave

Do not put the battery pack into a micro-
wave oven or a pressurized chamber.

Stop Using

Should the battery emit an abnormal 
odor, become hot to the touch, become 
discolored, change shape, or become in 
any way different from normal, remove it 
from the computer and stop using it.

z

Do not touch the terminals on the battery pack.  The 
battery pack may no longer function properly if the 
contacts are dirty or damaged.

z

Do not expose the battery pack to water, or allow it to 
become wet.

z

If the battery pack will not be used for a long period of 
time (a month or more), charge or discharge (use) the 
battery pack until the remaining battery level becomes 
30% to 40% and store it in a cool, dry place.

z

This computer prevents overcharging of the battery by 
recharging only when the remaining power is less than 
approx. 95% (when Economy Mode (ECO) is enabled: 
75%) of capacity.

z

The battery pack is not charged when the computer is 
first purchased.  Be sure to charge it before using it for 
the first time.  When the AC adaptor is connected to 
the computer, charging begins automatically.

z

Should the battery leak and the fluid get into your 
eyes, do not rub your eyes.  Immediately flush your 
eyes with clear water and see a doctor for medical 
treatment as soon as possible.

NOTE

z

The battery pack may become warm during 
recharging or normal use.  This is completely nor-
mal.

z

Recharging will not commence if internal tempera-
ture of the battery pack is outside of the allowable 
temperature range (0 °C to 55 °C {32 °F to 131 
°F}). (

Î

 "Battery Power" in onscreen Reference 

Manual)  Once the allowable range requirement is 
satisfied, charging begins automatically.  Note that 
the recharging time varies based on the usage 
conditions. (Recharging takes longer than usual 
when the temperature is 10 °C {50 °F} or below.)

z

If the temperature is low, the operating time is 
shortened.  Only use the computer within the 
allowable temperature range.

z

The battery pack is a consumable item.  If the 
amount of time the computer can be run by using a 
particular battery pack becomes dramatically 
shorter and repeated recharging does not restore 
its performance, the battery pack should be 
replaced with a new one.  

z

When transporting a spare battery inside a pack-
age, briefcase, etc., it is recommended that it be 
placed in a plastic bag so that its contacts are pro-
tected.

z

Always power off the computer when it is not in 
use. Leaving the computer on when the AC adap-
tor is not connected will exhaust the remaining bat-
tery capacity.

Read Me First

Summary of Contents for Toughbook CF-Y4HWPZZBM





































































Reviews: