43
Useful Information
Preparation
Prepare the following items:
• Recovery Disc (
Reference Manual
“Recovery Disc Creation
Utility”)
• USB DVD drive (optional) (refer to recent catalogs and other sources
for information about the products available)
Remove all peripherals (except for the USB DVD drive).
Connect the AC adaptor and do not remove it until installation is com-
plete.
1
Connect the DVD drive to the USB port.
2
Start the Setup Utility.
A
Display “Charm”, and touch - [Change PC settings] - [Update and
recovery] - [Recovery].
B
Touch [Restart now] under “Advanced startup”.
C
Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] -
[Restart].
Turn on the computer, and touch top left of the screen while [Panasonic]
boot screen is displayed.
If the [Panasonic] boot screen is not displayed, turn on the computer
while touching top left of the screen.
If the password is requested, enter the Supervisor Password.
3
Write down all of the contents of the Setup Utility and
touch [Exit] and double-touch [Load Default Values].
At the con
fi
rmation message, touch [Yes].
4
Check the [UEFI Boot] setting of the Setup Utility.
[UEFI Boot] should be set to as follows.
When the recovery disc for Windows 8.1 is used: [Enabled]
When the recovery disc for Windows 7 is used: [Disabled]
5
Set the Recovery Disc into the DVD drive.
6
Touch [Exit] and double-touch [Save Values and Reboot].
At the con
fi
rmation message, touch [Yes].
Computer will restart.
7
Touch top left of the screen while [Panasonic] boot screen
is displayed.
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
CPE02825ZA̲FZ-M1mk1-8.1̲OI̲E.indb 43
CPE02825ZA̲FZ-M1mk1-8.1̲OI̲E.indb 43
2014/02/14 13:03:37
2014/02/14 13:03:37