Quick set-up guide
1. Connect your Digital Converter box (DCB),
as shown on previous page and switch on.
2. Auto Setup will begin, your stations will
be located, sorted into order and stored
ready for use.
Note:
During Auto Setup the LED will flash.
When the LED has stopped flashing, if you
have connected the DCB to TV with
an RF cable, you will have to tune in TV
channel to view signal from DCB.
3. The software will automatically allocate
an available channel position for RF
output. Should there be any
interference you can change the RF
output channel using number buttons or
you can switch off RF output by
inputting 00.
4. Using Up/Down keys move to AV out
and if required change between RGB
and Video using Left/Right keys.
5. Move down again to specify TV screen
size i.e. 4:3 or 16:9.
6. Select
Continue to Owner ID
for the
option of entering a security code and
personal details into memory.
In the event of theft of the DCB this could
help Police to trace the owner.
7. Using up/down arrows to select the
character position and left/right arrows
to scroll through letters and numbers,
input your name, house number and
postcode.
8. To store any input information press
OK.
9.
To exit without saving press
EXIT.
5
You are now ready to begin viewing programmes
Note:
For ease of use all key operations are indicated at the bottom of the screen.
For future reference
write your PIN number here
_ _ _ _
