14
Tuning
Auto tuning automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your
TV to receive the local stations.
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose Tuning menu.
Access Tuning menu.
Move to choose Auto tuning.
Access Auto tuning.
Notes:
• If you proceed with the next step all tuning data will be erased (all stations and their programme
positions stored in your TV’s memory will be wiped out so the new settings can be stored).
• If you exit the procedure after this point and before Auto tuning is complete, no station information will
be stored. Restart and complete the Auto tuning procedure so that the TV is retuned.
Press to start Auto tuning.
The TV will search for, locate, store and then sort
into order your local stations.
Once this operation is completed the TV will display
the programme now stored on programme position 1.
Press the TV/AV button at any time to go back to watching
TV (please read the Notes in the above procedure).
MENU
1
2
3
4
6
7
8
9
0
TV
OK
5
MENU
: Return to tuning menu
TV/AV :
To
exit
AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT
Stored CH36
CH36
9
Press F until Tuning mode is reached.
Press –/ or +/ to access Tuning mode.
Press F until Auto tuning is reached.
Press –/ or +/ to start search.
Press TV/AV at any time to exit the Tuning menu.
It is also possible to use the control panel buttons on the top of the TV to tune individual programme positions:
Notes:
• If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the
Colour system selection on page 12.
• After the Auto tuning is finished, press the Programme Number up button to confirm the tuning condition for each
Programme Number. If some Programme Numbers are unused, it is possible to skip such Programme Numbers.
Please refer to the Skip function on page 12.
Auto tuning
TV/AV
Auto tuning (via top panel)
Example: TX-20LA2M
