background image

55

Some problems will only occur when viewing DVB channels. Due to the different techniques involved in digital reception, 
DVB signal quality can be poor even if you appear to have a strong signal when viewing analogue programmes.
The DVB system requires a good quality signal to provide the best picture. When viewing analogue pictures, interference 
such as signal re

fl

 ection from nearby buildings or mountains causes ‘ghosting’, but still provides a viewable picture. 

For the DVB system, interference such as this can disrupt the 

fl

 ow of data causing the picture to appear to be made 

up of large blocks, or to freeze intermittently. If the picture disappears completely, this could mean that signal quality 
is very poor. If this happens often, you may need to improve your aerial system to provide a better signal. This TV 
contains a complex microprocessor which enables you to view enhanced digital services. Occasionally this device 
may need to be reset. This can be done by pressing the standby button on your remote control.

Symptoms

Checks

No DVB channels listed in the TV Guide after Auto 
Setup.

Exit

Info

Change display mode
Select channel

Select Programme

Category

Prog. type

+24 Hr

DVB TV Guide

:Landscape

Wed 12/05/04  10:46

Wed  12th

Time:

19:30

20:00

Prog. type

Category

All Services

20:30

21:00

21:30

All  Types

Category

All Services

Check that DVB transmissions are available from the 
transmitter you are currently using. If not, try directing 
the aerial at another local transmitter.

Check analogue transmissions. If picture quality is poor, 
you will need to improve or change your aerial system to 
receive DVB channels. Consult a local installer.

Blocky interference.
Picture freezes intermittently.

Blocky interference indicates that the signal quality is 
poor.
You should consider improving your aerial system.
To check the quality of your signal use the Signal Quality 
feature (see page 26).
Good quality signal – indication is green.
Poor quality signal – indication is red.

I have a good aerial system, but still cannot receive DVB 
stations.

If you have tried the previous solutions and are still unable 
to receive DVB channels, you may need to provide 
dedicated aerial feeds to the TV and other equipment.
This can be implemented using an aerial splitter or 
separate aerials.

TV

VCR

Aerial 
Input 
terminal

Aerial 
Input 
terminal

Aerial 
Input 
terminal

Separate
Aerial 

Separate
Aerial 

Aerial 
Output

Aerial 
Output

AERIAL
SPLITTER

DVB Troubleshooting

Summary of Contents for TX-26LXD500





























































Reviews: